Pre-refurbishment asbestos surveys · Nottingham and Nottinghamshire

Refurbishment Asbestos Survey Nottingham — inspect the exact fabric your project will disturb

Intrusive, project-specific asbestos surveys before refurbishment, fit-out, M&E alteration, structural work and renovation across Nottingham and Nottinghamshire.
UKAS 32982ISO/IEC 17020 InspectionIntrusive Work-Area SurveyNottingham & Nottinghamshire
Best suited to
Intrusive refurbishment & alteration
Nottingham & East Midlands enquiries
National enquiries

Investigate the exact building fabric the project will disturb

A Refurbishment Survey is designed around the specific alteration or refurbishment boundary and may require destructive access to hidden areas.

Walls & partitions

Openings, linings, boxing, risers, cavities and structural interfaces affected by the design.

Floors & ceilings

Floor finishes, screeds, voids, suspended ceilings, textured coatings and hidden layers.

Services & plant

M&E routes, ducts, service penetrations, plant replacement and associated fire-protection materials.

Send drawings and the specification, not just the building address

HSE requires the survey type and scope to match the work. A red-line plan, room schedule or description of the elements being altered helps ensure the intrusive inspection covers the intended disturbance.

See HSE survey guidance and ASM's UK Refurbishment Survey page.

Useful pre-survey information

  • marked plans
  • scope of works
  • M&E specification
  • retained elements
  • soft-strip sequence
  • services and isolations
  • existing reports
  • access and occupation constraints

Survey before disturbance, then define the asbestos work

1

Define refurbishment

Confirm the exact work area and elements affected.

2

Survey intrusively

Investigate the relevant building fabric under controlled conditions.

3

Scope ACM actions

Define removal, protection or design changes before disturbance.

4

Release the work area

Provide clear asbestos information for the next controlled project stage.

The survey result should feed straight into the project plan

Use the findings to decide whether removal, further testing, analytical support or a design change is required.

Removal

Where ACMs conflict with the works, obtain a comparable project-specific removal scope.

Air monitoring / clearance

Analytical support may be needed around removal or licensed enclosures depending on the work.

One additional material

Targeted sampling can resolve a newly exposed suspect material where a wider resurvey is not required.

Unexpected disturbance

Stop work, restrict further disturbance and assess the material and contamination before relying on an air test alone.

Pre-work surveys for city-centre conversions, student property and commercial fit-outs

Lace Market & Hockley conversions

Historic warehouses, workshops and commercial buildings converted to residential, hospitality or office use can retain ACMs within roofs, floors, partitions, services, fire protection and concealed voids.

Intrusive inspection may need coordination around cornices, lath-and-plaster construction, retained finishes, hidden service zones and conservation-sensitive building elements.

Housing & student accommodation

Kitchens, bathrooms, rewires, heating upgrades, floor removal, ceiling work, extensions, loft conversions and room reconfiguration can disturb concealed ACMs that a routine Management Survey was not designed to investigate.

Work around shared service routes should be included in the agreed refurbishment scope.

Universities, healthcare & commercial estates

Phased occupied work should map the intrusive survey to every ceiling, floor, riser, wall, service route and plant area affected by the project design.

Office, hotel and retail fit-outs may include suspended ceilings, raised floors, partitions, ducts, fan-coil systems and landlord interfaces. Occupation, noise, making-safe arrangements and programme-critical access should be agreed in advance.

Nottingham and the East Midlands supported through ASM's Leeds regional office

ASM supports projects throughout Nottingham, Nottinghamshire and the wider East Midlands through its Leeds regional team. UKAS-accredited bulk sample analysis is undertaken at ASM's Sunderland headquarters laboratory within the applicable accredited scope.

ASM Leeds Regional Office

Ground Floor
Radley House
Richardshaw Road
Pudsey, Leeds
LS28 6LE

Nottingham & East Midlands:
0113 532 7195

Survey:
survey@asbestosSM.co.uk

Monday–Friday
08:00–18:00

UKAS Accreditation No. 32982

Nottingham, Nottinghamshire & East Midlands coverage

Nottingham City Centre, Lace Market, Hockley, The Park, Sneinton, St Ann's, Mapperley, Sherwood, Arnold, Beeston, West Bridgford, Wollaton, Lenton, Radford, Clifton, Carlton, Gedling, Bulwell, Hucknall, Ilkeston, Stapleford and Long Eaton, with wider attendance across Mansfield, Sutton-in-Ashfield, Kirkby-in-Ashfield, Newark-on-Trent, Worksop, Derby, Loughborough, Leicester and the wider East Midlands.

Attendance is subject to project requirements, scope, access and availability.

ASM's defined asbestos inspection activities are accredited to ISO/IEC 17020 and defined testing activities to ISO/IEC 17025 under UKAS accreditation number 32982. Current UKAS schedules define the precise scope and accredited locations.

Nottingham & Nottinghamshire FAQs

When do I need a Refurbishment Asbestos Survey?

Before intrusive refurbishment or alteration that could disturb asbestos hidden in building fabric, the asbestos information should be suitable for the exact work boundary.

Is a Management Survey enough for renovation?

Not automatically. Refurbishment can require more intrusive investigation of concealed materials.

Does the survey need to cover the whole building?

Only where the whole building is within the refurbishment scope. A project-specific survey can be limited to clearly defined work areas.

Can the survey involve destructive inspection?

Yes. Refurbishment Surveys can require destructive access to investigate concealed building elements affected by the planned work.

What happens if asbestos is identified?

The project team uses the findings to decide whether ACMs need removal, protection, design change or other controls before refurbishment proceeds.

Send the work scope before the surveyor attends

Provide the address, drawings, marked work areas, specification, existing asbestos reports, access restrictions and programme. ASM can define the intrusive survey boundary and provide a written quotation.