Asbestos Reinspection Survey Leicester — keep the register matched to the building
Ask what has changed since the asbestos was first recorded
A reinspection revisits known or presumed ACMs rather than starting the building survey from zero. It checks condition, accessibility, vulnerability and whether management actions need updating.
Condition
Record visible deterioration, damage, surface treatment and evidence of disturbance.
Accessibility
Check whether room use or maintenance changes make the ACM more vulnerable.
Management action
Update priorities where repair, protection, removal or closer monitoring is appropriate.
The asbestos register should describe the building as it exists now
HSE says the register must be kept up to date and the dutyholder's overall management plan reviewed every 12 months or sooner where necessary.
Individual ACM condition-monitoring arrangements should still reflect condition, vulnerability, access and likelihood of disturbance rather than applying one automatic interval to every material.
Update sooner after removal, repair, new survey information, accidental disturbance or changed use.
Use the reinspection record to close actions
Confirm the deliverables when agreeing the commission, then review the information against the actual property or work scope.
- Match each inspected item to its existing register reference.
- Record current condition, photographs and any change in accessibility or use.
- Separate verified completed removal or repair from work merely reported as complete.
- Assign an owner and target date to new actions and unresolved access; update the management plan where the findings change the controls.
If a location, quantity or assumption is unclear, resolve it before the relevant maintenance or construction stage. Keep reports and completion evidence together so the next contractor can understand what was assessed, what changed and what still needs attention.
Reinspection, new survey or intrusive project survey?
Use the existing register and planned work to choose the correct route.
Reinspection
Known or presumed ACMs are already recorded and need condition review.
Management Survey
Existing information is missing or inadequate for normal occupation and foreseeable maintenance.
Refurbishment Survey
Intrusive alteration is planned and concealed building fabric will be disturbed.
Demolition Survey
Full or partial demolition requires highly intrusive pre-demolition information.
Turn changed condition into a clear action
Use the revised condition evidence to keep the management system practical and current.
Continue management
Sound ACMs with suitable controls can remain managed in place.
Repair or protect
Damage or vulnerability may justify protection, encapsulation or another remedial measure.
Remove
Removal can be appropriate where condition or future disturbance makes continued management unsuitable.
Reinspection as Leicester premises change their operations
Equipment and access changes
A material recorded above a workbench may become difficult to inspect after new equipment is installed. Explain layout changes before the visit and arrange suitable access. Record any new restriction clearly so the item remains under management rather than disappearing from the register because it could not be seen.
Repair evidence and completed actions
Provide records of encapsulation, repair or removal alongside the previous survey and register. Match them to the material identifiers. An entry should only be changed to reflect work that can be evidenced, with any uncertainty investigated. A completion date in a maintenance spreadsheet is not by itself a full explanation of what happened to the asbestos.
Responsibility during tenancy changes
When a workshop, shop or managed unit changes occupier, review the use and maintenance arrangements as well as material condition. Agree who takes ownership of outstanding actions. Reinspection does not replace an intrusive survey where the incoming occupier plans to alter fabric that the existing inspection did not reach.
UKAS-accredited inspection and testing, with the scope kept clear
Asbestos Surveying and Monitoring Ltd holds UKAS accreditation number 32982 for defined inspection activities to ISO/IEC 17020 and testing activities to ISO/IEC 17025. The current schedules define the accredited activities and locations. Bulk asbestos identification is undertaken at the Sunderland laboratory.
Accreditation applies to the organisation and its defined activities. Asbestos removal, preparation of management plans, watching briefs and soil remediation are not described as UKAS-accredited work.
Check ASM’s current UKAS schedules (search 32982) ↗ · Sunderland laboratory and submission guidance
Prepare for the reinspection visit
- Latest register and the original survey limitations.
- Changed room names, unit boundaries and equipment layouts.
- Evidence for repairs, encapsulation and removal.
- Outstanding actions, damage reports and any proposed alterations.
Cost and programme follow the agreed survey scope
For budgeting, use the Leicester asbestos survey cost guide and its clearly labelled national reference figures. The final quotation depends on the number of buildings and rooms, required intrusion, sampling, safe access, occupation and report requirements.
Tell ASM about a purchase deadline, contractor start date or phased project before booking. Agree site attendance and report delivery separately, together with what happens if access is unavailable or the work boundary changes. Removal, analytical attendance and reinstatement are separate services unless the quotation expressly includes them.
Leicester service coverage and enquiries
ASM coordinates Leicester enquiries and site attendance through its national team. Bulk sample analysis is undertaken at the Sunderland laboratory within the applicable accredited scope. Arrange attendance or sample submission before dispatching material.
ASM · Leicester service enquiries
Site attendance by prior arrangement. Send the property address, required service and target dates.
National enquiries
0330 433 9680
Monday–Friday · 08:00–18:00
Leicester and surrounding enquiries
Leicester city centre, St George’s, Belgrave, Highfields, Braunstone, Beaumont Leys, Evington and surrounding areas.
Provide the full postcode, property use and intended work. Scope, safe access, programme and attendance are agreed for the individual instruction.
Discuss Leicester projects in the city centre, Belgrave, Highfields, Evington, Aylestone, Knighton, Stoneygate, Humberstone and the West End. For surrounding locations such as Oadby, Wigston, Birstall, Thurmaston, Syston, Glenfield, Anstey and Leicester Forest East, provide the exact postcode and service required. These enquiries are assessed against scope, access and programme; the wider urban area is not the same as Leicester City Council’s boundary.
Leicester services connected to condition monitoring
Use reinspection findings to update the register, management plan or remedial actions without confusing the service with a project-specific intrusive survey.
Asbestos Reinspection Survey Leicester FAQs
What is an asbestos reinspection survey?
It is a follow-up condition assessment of known or presumed ACMs already recorded in an asbestos register.
How often should asbestos be reinspected?
HSE requires the management plan to be reviewed every 12 months or sooner where necessary and the register kept current. Individual ACM condition checks should be scheduled according to condition, vulnerability, access and likelihood of disturbance rather than applying one automatic interval to every material.
Is reinspection the same as a new Management Survey?
No. Reinspection focuses on already recorded ACMs. A new or updated Management Survey may be needed where the underlying building information is inadequate.
Are known ACMs always resampled?
No. Known materials do not normally need repeated laboratory identification unless the information is unclear or a new suspect material requires testing.
What if condition has deteriorated?
Depending on circumstances the ACM may need repair, protection, encapsulation, removal or a changed monitoring arrangement.
What happens if an old asbestos entry cannot be located?
It should be recorded as unresolved and investigated against the earlier plans, photographs and work records. It should not be deleted or marked satisfactory solely because it was not found during the visit.
What if new machinery blocks access to a recorded material?
Plan suitable access where possible and record any remaining restriction. Keep the material in the management record until the uncertainty is resolved; inability to see it does not demonstrate removal.
Can a maintenance log prove an asbestos item was removed?
The record needs sufficient supporting evidence to identify the material and work completed. Supply relevant removal and completion documents, and investigate inconsistencies before changing the register.
Can I enquire about a site outside Leicester city?
Yes. Send the address and service required for a surrounding location such as Oadby, Wigston, Birstall, Thurmaston, Syston, Glenfield, Anstey or Leicester Forest East. ASM confirms attendance against scope, access and programme. The relevant council and permissions depend on the site address.
Send the existing asbestos register before we price the reinspection
Provide the property address, current survey or register, number of buildings, approximate number of ACM entries, access constraints and required date. ASM can scope a focused condition review.

